GRUPO ABERDEEN
Grupo Aberdeen · Home

WASTEWATER TREATMENT · EL SALVADOR

Wastewater treatment systems in El Salvador

Grupo Aberdeen brings together treatment technologies, installation, maintenance and monitoring for wastewater projects in El Salvador.

We help assess new treatment systems, service existing installations and define the scope of turnkey projects.

01 / SERVICES

What does your project need?

A starting point for every stage of your project.

01

Install a treatment system

We review the application and site conditions to define equipment, connections and system integration. Installation and commissioning are agreed according to the technology and project scope.

Equipment installation
02

Maintain an existing system

Inspection, technical cleaning, checks on aeration and controls, spare parts and follow-up. An assessment identifies routine maintenance needs, repairs and any changes the system may require.

Wastewater treatment system and septic tank maintenance
03

Develop a turnkey project

A coordinated scope that may include design, civil works, equipment supply, installation and commissioning. Responsibilities, site conditions and acceptance criteria are defined before work begins.

Turnkey projects
04

Assess an existing tank

We assess whether a tank can be adapted using PUROO or PUROO Complete technology. Suitability depends on wastewater characteristics, working volume, internal layout, watertightness and access.

Tank assessment and PUROO retrofits

02 / THE PROJECT JOURNEY

From assessment
to follow-up.

  1. 01

    Assess

    Wastewater, flow, loading, ground conditions and discharge.

  2. 02

    Define

    Technology, scope, responsibilities and requirements.

  3. 03

    Integrate

    Civil works, equipment, connections and commissioning.

  4. 04

    Follow up

    Maintenance, measurements and results review.

The scope is defined for each project. A new installation and a maintenance visit require different work and deliverables.

03 / TECHNOLOGIES

Technology selected
for the application.

An equipment rating does not replace project sizing. Configuration, compatibility and availability are confirmed for each application.

SELECTION AND SCOPE

Before choosing a system.

Packaged wastewater treatment systems

A packaged wastewater treatment system brings treatment stages together in a unit or set of equipment. A compact layout can simplify integration, but selection depends on flow, wastewater loading, available space and discharge conditions.

When comparing packages, ask for an itemized list of the tank or treatment unit, aeration equipment, controls and accessories included. The equipment supplied varies by model and proposal. Do not assume that all connections or ancillary equipment are included.

Define excavation, foundations, civil works, pipework and electrical connections, installation and commissioning separately. Maintenance access and ongoing operation should also be considered from the outset.

Certified treatment systems: check the model

When evaluating a certified treatment system, ask for the standard, exact model, capacity and configuration covered by the certificate. The evidence applies to that scope and its test conditions, not to an entire brand, Grupo Aberdeen or every installation.

FujiClean has models listed under NSF/ANSI 40 and NSF/ANSI 245. See its page for model-specific references and the technical comparison, and check the official listing when specifying equipment.

FujiClean model-specific certifications

For ATB PUROO Complete, review the declaration of performance under EN 12566-3 and the DIBt approval, each with its own scope. These documents are distinct from NSF certification.

Equipment certification does not replace Salvadoran permits or an assessment of RTS compliance or the intended use of treated water. Design, operation and monitoring must be reviewed for each project.

04 / LOCAL EXPERIENCE

Grupo Aberdeen projects
in El Salvador.

Installation and maintenance documented in Grupo Aberdeen projects.

TOURIST FACILITY · EL SALVADOR

FujiClean CE30
at a tourist facility

FujiClean CE30 installation for a tourist facility in El Salvador. See the reference in our projects section.

View the project reference

These installations reflect their particular site conditions. They do not establish the appropriate configuration for other projects.

05 / EVIDENCE AND MANAGEMENT

Monitoring and
environmental management.

LAMA: connecting measurements with operations

A monitoring program brings together sampling locations, parameters, analyses and operating conditions. For regulatory purposes, the testing laboratory and required scope of accreditation are verified.

Wastewater monitoring with LAMA

Requirements defined for the project

The activity, location and discharge destination determine the environmental and construction requirements to review. Permits, reporting and maintenance have different scopes.

Water and wastewater environmental consulting

06 / PREPARE FOR THE NEXT STEP

What do we need
to prepare
a proposal?

Cost depends on capacity, treatment requirements, civil works, access and service scope. Reviewing these details helps us prepare a proposal for your project.

Share the information you have:

  • Location and type of activity.
  • Wastewater source and estimated flow.
  • Number of users or operating schedule.
  • Available space and intended discharge destination.
  • System model, last service and observed problem, if a system is already installed.
  • Existing analyses, drawings or permits, where applicable.

THE NEXT STEP

Let’s discuss
your treatment system.

Tell us whether you need installation, maintenance or an assessment of an existing system.

WhatsApp